




| DALI Product ID | 10045 |
| Product Name | DALI-2 Actuator Colour 4-gang |
| Brand Name | JUNG |
| Status | Certified: DALI-2 |
| Product Part Number | 300041SDA2R |
| GTIN | 4011377322523 |
| Bus unit configuration | - |
| Test conditions | Tambient = 23°C V = 230VAC / 50 Hz This is a rebrand of device ID 9447 |
| Test type | Full |
| Family reference product ID | - |
| DALI test sequence software version | 2.5.0.0 |
| Bus current consumption Maximum current consumed from the bus power supply. If no value shown, 2mA is required. | |
| Guaranteed supply current Current that this bus power supply can provide. Total must be sufficient to provide the total "bus current consumption" of all devices. | 64 |
| Maximum supply current Highest current that this bus power supply may provide. Total must not exceed 250mA. | 250 |
If multiple versions exist then contact the manufacturer for details of the older versions.
| Hardware version | 1.0 |
| Firmware version | 1.0 |
-
The JUNG DALI-Actuator 4-gang is a multi-masterapplication controller with four DALI Broadcast- Outputs for controlling electronic ballasts viathe KNX installation bus (with / without KNXData Secure communication). It supportsballasts according to EN 62386-102 ed1 (DALI-1), devices according to EN 62386-102 ed2(DALI-2). Special DALI ballasts for colour control(RGB(W)/TW) according to EN 62386-209 willalso be supported. In addition DALI-2 sensors(as Application Controller) in broadcast modewill supported.
| 101 | 2.0 |
| 103 | 2.0 |