Our websites use cookies on your device to give you the best user experience. By using our websites, you agree to the placement of these cookies. To learn more, read our privacy policy.

DALI-Gateway Plus REG

General information

DALI Product ID3365
Product NameDALI-Gateway Plus REG
Brand NameInsta
StatusCertified: DALI-2
Product Part Number64543024
GTIN4250582503024
Bus unit configuration-

Testing

Test conditions230VAC, 50Hz
Test typeFull
Family reference product ID-
DALI test sequence software version2.1.1.0

Technical

Bus current consumption

Maximum current consumed from the bus power supply. If no value shown, 2mA is required.

Guaranteed supply current

Current that this bus power supply can provide. Total must be sufficient to provide the total "bus current consumption" of all devices.

128
Maximum supply current

Highest current that this bus power supply may provide. Total must not exceed 250mA.

250

Hardware/firmware information

If multiple versions exist then contact the manufacturer for details of the older versions.

Hardware version73138532
Firmware version45065904

Description

The single master DALI Gateway forms the interface between a KNX installation and a digital DALI lighting system. The DALI Gateway: - allows the switching and dimming of a maximum of 64 lights with a DALI operating device (e.g. electronic ballast). - is able to integrate standard DALI operating devices for lighting control into centrally-supplied emergency lighting systems as an emergency light.Alternatively or in addition, the DALI Gateway permits the control and function monitoring of individual battery-operated emergency lighting operating devices - is supplied completely via the mains voltage connection and makes the DALI system voltage available

DALI parts and versions

1012
1032

Product properties

The application controller supports control gear with no device types, those with 1 device type and those with more than 1 device type. For certifications before October 2025, check with the manufacturer.

This product can be used to update the firmware of other products that implement part 105 Firmware Transfer.

Sensors, switches, push-buttons, etc.

Maximum current consumed from the bus power supply. If no value shown, 2mA is required.

“Other properties” do not imply certification to such standards.



Reference design of firmware or hardware available