




DALI Product ID | 3901 |
Product Name | LEDGEAR 15W Looping Driver: C916-40350DB-F |
Brand Name | LEDGEAR |
Status | Certified: DALI-2 |
Product Part Number | C916-40350DB-F |
GTIN | 0686268784182 |
Bus unit configuration | - |
Family reference product ID | - |
DALI test sequence software version | 2.2.0.0 |
Bus current consumption Maximum current consumed from the bus power supply. If no value shown, 2mA is required. | 1.6 |
Guaranteed supply current Current that this bus power supply can provide. Total must be sufficient to provide the total "bus current consumption" of all devices. | 0 |
Maximum supply current Highest current that this bus power supply may provide. Total must not exceed 250mA. | 0 |
If multiple versions exist then contact the manufacturer for details of the older versions.
Hardware version | 0.1 |
Firmware version | 17.0 |
LEDGEAR® C9, the most compact design DALI-2 looping LED driver in the world, which covering all the wattage within 15W(350mA) for indoor lighting, especially suitable for cut out hole no less than 66mm, and bigger but with small ceiling void. The driver equipped with push-fit terminals, which enable through wiring of Primary, DALI and Push wires throughout the driver, and save lots of time and effort on a site’s actual wiring work. The terminals allow quick cable connections without any tool, and also support a variety of wire gauge and cable thicknesses. Assembled with 4xDIP switches, the driver allows output current selectable, or programmed any output current by DALI. Variable output voltage of 14-40V with constant current output. These wide operating windows and easy wiring for LED modules makes it super flexibility and warehouse inventory reduction.
101 | 2.0 |
102 | 2.0 |
207 | 1 |