




DALI Product ID | 5007 |
Product Name | DALI-2 Power-Drehgeber |
Brand Name | Feller |
Status | Certified: DALI-2 |
Product Part Number | 40085.DALI.D2.BSE |
GTIN | 7613175052403 |
Bus unit configuration | - |
https://online-katalog.feller.ch/kat_details.php?fnr=40085.DALI.D2.BSE
Test conditions | 230VAC, 50Hz. This device was tested as advised in the Product Submission Guide: for products that include an integrated bus power supply and bus powered control device or bus-powered control gear, execute the (part 101) tests on the bus power supply with the control device/control gear disconnected from the DALI bus, and then disconnect the bus power supply from the DALI bus, and run the complete set of tests (101, 102/103, 2xx/3xx) on the control gear/control device |
Test type | Full |
Family reference product ID | - |
DALI test sequence software version | 2.2.0.0 |
Bus current consumption Maximum current consumed from the bus power supply. If no value shown, 2mA is required. | 2 |
Guaranteed supply current Current that this bus power supply can provide. Total must be sufficient to provide the total "bus current consumption" of all devices. | 56 |
Maximum supply current Highest current that this bus power supply may provide. Total must not exceed 250mA. | 250 |
If multiple versions exist then contact the manufacturer for details of the older versions.
Hardware version | 73141630 |
Firmware version | 45082230 |
The Power DALI rotary controller TW is a DALI 2 single master control device and supplies the control current for up to 28 DALI control gears. It is used to adjust the brightness of luminaires with a DALI interface and to set the colour temperature for DALI control gears of device type 8 (Tunable White). The operation always applies to all connected devices (broadcast). The minimum brightness, the switch-on brightness and the colour temperature limits can be saved.
101 | 2.0 |
103 | 2.0 |