DALI DRIVER DT8 TW CV 100w 12V
General information
| DALI Product ID | 5014 |
| Product Name | DALI DRIVER DT8 TW CV 100w 12V |
| Brand Name | Carlo Gavazzi Controls S.p.A. |
| Status | Certified: DALI-2 |
| Product Part Number | SBBADT8CV12 |
| GTIN | 8054155000479 |
| Bus unit configuration | - |
Testing
| Test conditions | |
| Test type | Full |
| Family reference product ID | - |
| DALI test sequence software version | 2.3.0.0 |
Technical
| Bus current consumption Maximum current consumed from the bus power supply. If no value shown, 2mA is required. | 2 |
| Guaranteed supply current Current that this bus power supply can provide. Total must be sufficient to provide the total "bus current consumption" of all devices. | 0 |
| Maximum supply current Highest current that this bus power supply may provide. Total must not exceed 250mA. | 0 |
Hardware/firmware information If multiple versions exist then contact the manufacturer for details of the older versions.
If multiple versions exist then contact the manufacturer for details of the older versions.
| Hardware version | 1.0 |
| Firmware version | 34.0 |
Description
- 4 x 25W LED load applied by manufacturer - 230V 50Hz 25℃ - ProbitLab2
DALI parts and versions
| 101 | 2.0 |
| 102 | 2.0 |
| 207 | 1 |
| 209 | 2.0 |
Product properties
© 2021 Digital Illumination Interface Alliance. All rights reserved. DALI, the DALI Logo, DALI-2, the DALI-2 Logo, DiiA, the DiiA Logo, D4i,
the D4i Logo, DALI+ and the DALI+ Logo are trademarks in various countries in the exclusive use of the Digital Illumination Interface Alliance.