KNX DALI2 Gateway 1 channel
General information
| DALI Product ID | 7419 |
| Product Name | KNX DALI2 Gateway 1 channel |
| Brand Name | Hager |
| Status | Certified: DALI-2 |
| Product Part Number | TYFS671D |
| GTIN | 3250610050224 |
| Bus unit configuration | - |
Testing
| Test conditions | T ambient = 23°C V = 110VAC, 230VAC, 240VAC / 50 Hz. Rebrand of 6885. |
| Test type | Full |
| Family reference product ID | - |
| DALI test sequence software version | 2.6.0.0 |
Technical
| Bus current consumption Maximum current consumed from the bus power supply. If no value shown, 2mA is required. | |
| Guaranteed supply current Current that this bus power supply can provide. Total must be sufficient to provide the total "bus current consumption" of all devices. | 148 |
| Maximum supply current Highest current that this bus power supply may provide. Total must not exceed 250mA. | 250 |
Hardware/firmware information If multiple versions exist then contact the manufacturer for details of the older versions.
If multiple versions exist then contact the manufacturer for details of the older versions.
| Hardware version | 1.0 |
| Firmware version | 1.0, 3.0 |
Description
The Hager DALI-Gateway secure is a multi-master application controller for controlling electronic ballasts with one DALI-Interface via the KNX installation As from firmware version 3.0, sensors (input devices) and additional ‘other application controllers’ are supported. In addition, the incorrect range check for the current bus device configuration (103-6.1 (DIIA-438)) has been fixed and checks for memory bank 0, memory location 0x1C (103-6.1 (DIIA-445)) have been added.
DALI parts and versions
| 101 | 2.0 |
| 103 | 2.0 |
Product properties
© 2021 Digital Illumination Interface Alliance. All rights reserved. DALI, the DALI Logo, DALI-2, the DALI-2 Logo, DiiA, the DiiA Logo, D4i,
the D4i Logo, DALI+ and the DALI+ Logo are trademarks in various countries in the exclusive use of the Digital Illumination Interface Alliance.