Our websites use cookies on your device to give you the best user experience. By using our websites, you agree to the placement of these cookies. To learn more, read our privacy policy.

DALI-2 DT6 NFC 500-1400mA 45W

General information

DALI Product ID8297
Product NameDALI-2 DT6 NFC 500-1400mA 45W
Brand Namerutec
StatusCertified: DALI-2
Product Part Number80690
GTIN4012094806907
Bus unit configuration-

Testing

Test conditions230VAC input - LED module applied by the manufacturer - ProbitLab2 - 25℃ ambient temperature
Test typeFull
Family reference product ID-
DALI test sequence software version2.3.3.0

Technical

Bus current consumption

Maximum current consumed from the bus power supply. If no value shown, 2mA is required.

2
Guaranteed supply current

Current that this bus power supply can provide. Total must be sufficient to provide the total "bus current consumption" of all devices.

0
Maximum supply current

Highest current that this bus power supply may provide. Total must not exceed 250mA.

0

Hardware/firmware information

If multiple versions exist then contact the manufacturer for details of the older versions.

Hardware version2.0
Firmware version5.0

Product reference product description

DALI-2 push dimming actuactor AC

Description

rutec DALI-2 push dimming actuator AC1 address 1 channel single colourDALI address automatically addressable fromDALI master controller (e.g. gateway)According to DALI standard protocol IEC62386-101:2014, IEC62386-102:2014, IEC62386-207 Ed2suitable for commercially available DALI devicesDALI-2 or push dim functionfor indoor use, IP20input voltage: 200-240 V AC 50/60 Hz, 200-240 V DCOutput current (500-1400 mA) adjustable via NFC in 0.1 mA stepspower: 3-45 watts depending on ouput current (see manual)device type: DT6protection class II, CE, ROHSprotection against short circuit, overvoltage and overtemperaturedimming range: 0.1-100 % CCR dimming, flicker freedimming curve: linear/logarithmictemperature range: -20 °C to +45 °CLxWxH in mm: 145 x 45 x 30

DALI parts and versions

1012.0
1022.0
2071
2512.0
2522.0
2532.0

Product properties

LED drivers, ballasts, ECGs, etc.

Feature available from test sequence version 2.7.0.0, expected in Q3 2025.

Maximum current consumed from the bus power supply. If no value shown, 2mA is required.

“Other properties” do not imply certification to such standards.



Reference design of firmware or hardware available