




DALI Product ID | 8784 |
Product Name | DALI Gateway Color 2fach |
Brand Name | Feller |
Status | Certified: DALI-2 |
Product Part Number | 36163-02-A.REG |
GTIN | 7613175075136 |
Bus unit configuration | - |
https://online-katalog.feller.ch/kat_details.php?fnr=36163-02-A.REG
Test conditions | Tambient = 23°C V = 110VAC, 230VAC, 240VAC / 50 Hz This is a rebrand of device ID 6812 |
Test type | Full |
Family reference product ID | - |
DALI test sequence software version | 2.6.0.0 |
Bus current consumption Maximum current consumed from the bus power supply. If no value shown, 2mA is required. | |
Guaranteed supply current Current that this bus power supply can provide. Total must be sufficient to provide the total "bus current consumption" of all devices. | 128 |
Maximum supply current Highest current that this bus power supply may provide. Total must not exceed 250mA. | 250 |
If multiple versions exist then contact the manufacturer for details of the older versions.
Hardware version | 1.0 |
Firmware version | 1.0, 3.0 |
The Feller DALI-Gateway Secure is a multi-master application controller for controlling electronic ballasts with two DALI interfaces via the KNX installation bus (with or without KNX Data Secure communication). It supports ballasts according to EN 62386-102 ed1 (DALI-1) and devices according to EN 62386-102 ed2 (DALI-2). Special DALI ballasts for color control (RGB(W)/TW) according to EN 62386-209 are also supported. Starting from firmware version 3.0, sensors (input devices) and additional "other application controllers" are supported. Additionally, the incorrect range check for the current bus device configuration (103-6.1 (DIIA-438)) has been resolved, and checks for memory bank 0, memory location 0x1C (103-6.1 (DIIA-445)), have been added.
101 | 2.0 |
103 | 2.0 |